http://192.168.1.45/ 2026-04-13T23:06:39+00:00 http://192.168.1.45/ http://192.168.1.45/lib/tpl/flat/images/favicon.ico text/html 2019-03-25T17:59:36+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=building_debian_virtual_machine&rev=1553551176&do=diff Building a Debian Virtual Machine Create the VM Open Hyper-V Manager New -> Virtual Machine Give it a name Assign memory You can check 'dynamic' for now, and set the range later by right clicking on the VM, choosing settings, and then RAM. For Debian, I use 512-2048, depending on what the VM will be used for, but Debian is fairly lightweight. text/html 2018-06-01T19:39:12+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=cat6&rev=1527896352&do=diff white orange orange white green blue white blue green white brown brown text/html 2022-03-01T17:52:28+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=configuring_smb_shares&rev=1646175148&do=diff Configuring SMB Shares on the linux box: install samba: sudo apt update sudo apt install samba edit the config: sudo nano /etc/samba/smb.conf #============================ Share Definitions ============================== [sda1] path = /pathtoyourshare/yourdirectorytoshare writable = yes guest ok = yes guest only = yes read only = no create mode = 0777 directory mode = 0777 force user = nobody text/html 2019-02-15T11:54:22+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=did_all_begin&rev=1550249662&do=diff How Did It All Begin? I was tired of having poor performance on LAN and poor wifi range despite having a fiber connection and the combo router/modem/ap being centrally located. I was also out of LAN ports. A colleague suggested buying a Cisco firewall on ebay. Around this time I wanted to brush up on my cisco commands and possibly start a lab, so I bought an ASA5510. This would come to replace my ISP's combo device and take over DHCP, text/html 2022-01-13T00:35:27+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=domain&rev=1642052127&do=diff Joining a computer to an already established domain: you cannot use a default admin account. if this is the only account on the machine, create a new user, and follow the steps once logged into that user. you will also need a domain admin user from the domain to authorize the join text/html 2021-07-16T00:50:32+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=extend_hard_disk_debian_vm&rev=1626411032&do=diff expand hard disk in linux vm -merge all checkpoints -shutdown VM -make a copy of your virtual hard drive and store in another location just in case -rightclick VM, seetings, edit -virtual hard drive from left menu -edit -click next -choose expand, click next text/html 2022-01-26T16:36:56+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=linux_raid&rev=1643233016&do=diff HP Hardware RAID Status Commands for Linux: <http://kb.gtkc.net/hp-smart-array-cli-commands/> <https://binaryimpulse.com/2013/09/hp-array-configuration-utility-command-cheat-sheet/> these commands will show you RAID controller status, config, and details: hpssacli ctrl all show config hpssacli ctrl all show status hpssacli ctrl all show detail pd is required to show details from the actual arrays and drives themselves: text/html 2022-04-20T16:10:00+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=linux_software_raid&rev=1650485400&do=diff ---------- ref: <https://askubuntu.com/questions/1234949/install-ubuntu-20-04-focal-fossa-with-raid-1-on-two-devices> ---------- This is for manually configuring software RAID1 for two disks. This can be useful for isolating your boot drive from your storage RAID pool, but still ensuring redundancy, without the need for chipset specific software/mobo RAID or a secondary RAID controller. text/html 2022-04-20T15:34:58+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=lsi_raid_ubuntu&rev=1650483298&do=diff download storcli: <https://downloadcenter.intel.com/download/25499/StorCLI-Phase-2-0> once unpacked and installed: cd /opt/MegaRAID/storcli64 commands: ./storcli64 /c0 show ./storcli64 /c0 /eall /sall show all ./storcli64 /c0 /eall /sall show rebuild ref: <https://support.nine.ch/articles/raid-configuration-using-storcli> text/html 2022-03-01T19:09:47+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=moving_nextcloud_data&rev=1646179787&do=diff Moving a Next Cloud Datastore this is particularly useful if you've used turnkey linux, or if you've installed nextcloud on a VM and want to move the storage to a NAS ref: <https://help.nextcloud.com/t/howto-change-move-data-directory-after-installation/17170> turn maintenance mode on for nextcloud: sudo -u www-data php /path/to/nextcloud/occ maintenance:mode --on text/html 2022-03-26T04:47:30+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=nfs_shares&rev=1648284450&do=diff - on nas share / target host: nano /etc/exports /mnt/sda1 192.168.1.62(rw,sync) /mnt/sdb1 192.168.1.62(rw,sync) sudo exportfs -a sudo systemctl restart nfs-kernel-server - on client nas host/directory sudo apt install nfs-common text/html 2022-01-20T14:08:50+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=nic-teaming&rev=1642705730&do=diff NIC Teaming/Bonding/LACP on the windows server side: sever manager > local server top pain, left side > nic teaming > enabled add the nics you wish to bond bottom right corner > tasks > add team name your team once applied, you will lose internet connect and gain a new IP. if you are doing this via RDP, use angry IP scanner or similar tools to find your server, RDP back in, and assign a static IP text/html 2019-10-29T20:32:36+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=octopi&rev=1572395556&do=diff Building an Octopi Server With A Raspberry Pi note: raspberry pi 4 will need the nightly build: <https://storage.googleapis.com/octoprint/2019-06-24_2019-06-20-octopi-buster-lite-0.17.0.zip> note: also worth noting that using the crappy mac bonjour protocol to find your printer is pretty...well..crap. IP scan for it using angryip: <https://angryip.org>. turn on mac address and mac vendor in the options and it will be easy to spot if it picks up an IP address. text/html 2020-12-10T01:35:28+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=pi_hole_gravity_sync&rev=1607582128&do=diff this guide is currenly a WIP as this script doesnt seem to work yet. I've raised the issue here: <https://github.com/vmstan/gravity-sync/issues/119> reference: <https://github.com/vmstan/gravity-sync> see this wiki's pi-hole guide if you have not already optional, but recommended, also refer to this wiki's unbound guide I used to run one pi-hole dns server in high availability. This meant that if the VM ever failed, or the physical server hosting the VM went down, the VM would automatical… text/html 2019-03-28T19:33:36+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=pihole_local_dns&rev=1553816016&do=diff Using Pi-Hole to Create Local DNS Entries 1. ssh to your pi-hole server 2. use nano to edit the dnsmasq: sudo nano /etc/dnsmasq.d/05-custom.conf 3. add the dns entry in the following format: address=/example.com/1.2.3.4 some examples from my network: text/html 2022-01-22T00:09:13+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=place_domain_upgrade&rev=1642828153&do=diff In Place Domain Upgrade I've used this method to go from 2012 to 2012r2, and from 2012r2 to 2016. It is relatively quick and painless. elevated command prompt from DC: D:\support\adprep\adprep /forestprep D:\support\adprep\adprep /domainprep wait for it to replicate throughout forest and domain text/html 2022-01-18T20:09:12+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=prometheus_new_host&rev=1642554552&do=diff note: this requires you already have a monitoring server with grafana/prometheus/node exporter setup. this is simply adding new VMs to monitoring and automating the agent install on the host itself. ssh to new host create new bash script using bash script note (see below) text/html 2022-02-05T18:06:41+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=python_service&rev=1644102401&do=diff Turn Your Python Script Into A Service make sure you are running systemd, if not, apt-get install it: systemd --version if nothing: sudo apt-get install -y systemd test your python script, once you are confident it works properly, note its location text/html 2019-03-28T18:26:52+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=reverse_proxy_guide&rev=1553812012&do=diff This is used for proxying several HTTPS/SSL subdomains to internal hosts behind your firewall using 1 proxy server. Install Nginx sudo apt-get install nginx Requesting your initial certificate from Let's Encrypt (Please Modify sub.domain.com to your domain) text/html 2018-06-23T15:27:35+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=reverse_proxy_server&rev=1529782055&do=diff Reverse proxy servers are typically used to forward requests from outside clients to internal servers. The clients are not aware there is an intermediary server, and often, the reverse proxy hosts an SSL for encryption (https) purposes. The example picture at the bottom of the page describes the following workflow: We see a client device reaching a firewall via a hostname which dns will translate to its public facing IP, the firewall will then forward the request via PAT (port address translat… text/html 2022-04-20T16:11:18+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=start&rev=1650485478&do=diff Home Introduction Step 1 How did it all begin? Where to start My topology (placeholder) Video walk-through (placeholder) Gallery (placeholder) Guides Virtual Machines/Servers Debian/Apache Dokuwiki Setup Home Assistant --Centralized Home Automation Control Virtual Wireless LAN Controller Cisco vWLC Hyper-V Deployment Cisco WLC Configuration DNS Pi-Hole DNS --Block Ads at the DNS level Unbound, turn your Pi-Hole into a Recursive DNS server Using Pi-Hole to Create Local DNS E… text/html 2019-02-15T11:31:28+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=step_1&rev=1550248288&do=diff Step 1: Scotch Step 2: ????? Step 3: Fixed text/html 2022-01-22T00:30:27+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=syncing_pihole_bash&rev=1642829427&do=diff Syncing Two Pi-Holes with Bash Scripting Since gravity sync current has some issues, I wrote a simple script to copy over your key files You can automate this with cron if you like, but I like to run it manually after any dns updates You will need 3 files, although 2 are just some ascii art to indicate when the script starts and finishes. paste these into your 3 files (dnsreplicate.sh, banner.txt, and banner2.txt) then run the bash script when you want to copy over your dns records. Also no… text/html 2020-12-09T23:07:37+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=unbound&rev=1607573257&do=diff for reference: <https://docs.pi-hole.net/guides/unbound/> unbound essentially turns your local pi-hole dns erver into a recursive dns server. see this for refrence: <https://social.dnsmadeeasy.com/blog/authoritative-vs-recursive-dns-servers-whats-the-difference/#:~:text=Authoritative name servers store DNS,for storing the domain's records>. what this means is your dns request come directly from your pi-hole, not through your ISP. this is good for several reasons, primary privacy and speed (… text/html 2019-02-15T11:58:25+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=where&rev=1550249905&do=diff Where To Start Decide what you want to learn, and then buy some hardware. You can do a lot of things in labs, virtual environments, and online, and if you prefer that, that's fine. This wiki is dedicated to hands on learning and immersion. Like I mentioned in text/html 2022-02-28T18:27:08+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=windows_linux_cifs_share&rev=1646090828&do=diff Windows to Linux CIFS Shares ref: <https://wiki.ubuntu.com/MountWindowsSharesPermanently> on windows side: right click on the drive or folder, properties, then sharing click the advanced sharing button, check share this folder name the share click permissions, and add the user you want to access the share. this can be the current windows users, or a new user you make specifically for sharing to linux text/html 2022-01-17T22:46:53+00:00 Anonymous (anonymous@undisclosed.example.com) http://192.168.1.45/doku.php?id=windows_software_raid&rev=1642477613&do=diff ref:<http://woshub.com/software-boot-mirror-gpt-windows/> windows now supports software raid with “storage spaces”, but you cannot do this to your OS drive, only secondary, tertiary, etc drives. this method allows you to use diskpart to replicate the format and partitions of your OS drive, and create a raid1 mirror with another drive, live in windows, without data loss, just one blank spare disk of the same size.