wiki.iViolet.net

This is an old revision of the document!

cisco configurations for port channel. change your channel number, interface range, and description to suit your deployment.

conf t
interface port-channel 4
interface rang gi0/29-gi0/32
channel-group 4
channel-group 4 mode active
conf int port-channel 4
spanning-tree portfast
port description NAS
no shut

verify:

show ethernet channel summary

on the windows server side:

sever manager > local server
top pain, left side > nic teaming > enabled
add the nics you wish to bond
bottom right corner > tasks > add team
name your team

once applied, you will lose internet connect and gain a new IP. if you are doing this via RDP, use angry IP scanner or similar tools to find your server, RDP back in, and assign a static IP