wiki.iViolet.net

This is an old revision of the document!

cisco configurations for port channel. bold are variables to be changed.

conf t
interface port-channel **4**
interface rang **gi0/29-gi0/32**
channel-group **4**
channel-group **4** mode active
conf int port-channel **4**
spanning-tree portfast
port description  **NAS**
no shut

verify:

show ethernet channel summary

on the windows server side:

sever manager > local server
top pain, left side > nic teaming > enabled
add the nics you wish to bond
bottom right corner > tasks > add team
name your team

once applied, you will lose internet connect and gain a new IP. if you are doing this via RDP, use angry IP scanner or similar tools to find your server, RDP back in, and assign a static IP