http://kb.gtkc.net/hp-smart-array-cli-commands/

https://binaryimpulse.com/2013/09/hp-array-configuration-utility-command-cheat-sheet/

these commands will show you RAID controller status, config, and details:

hpssacli ctrl all show config

hpssacli ctrl all show status

hpssacli ctrl all show detail

pd is required to show details from the actual arrays and drives themselves:

apt install pd

/opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show status

output should looke like this:

root@Violet-Nas-01:# /opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show status

 physicaldrive 2I:0:5 (port 2I:box 0:bay 5, 6001.1 GB): OK
 physicaldrive 2I:0:6 (port 2I:box 0:bay 6, 6001.1 GB): OK
 physicaldrive 2I:0:7 (port 2I:box 0:bay 7, 6001.1 GB): OK
 physicaldrive 2I:0:8 (port 2I:box 0:bay 8, 6001.1 GB): OK
 physicaldrive 1I:0:1 (port 1I:box 0:bay 1, 8001.5 GB): OK
 physicaldrive 1I:0:2 (port 1I:box 0:bay 2, 8001.5 GB): OK
 physicaldrive 1I:0:3 (port 1I:box 0:bay 3, 8001.5 GB): OK
 physicaldrive 1I:0:4 (port 1I:box 0:bay 4, 8001.5 GB): OK

/opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show detail

output should look like this:

root@Violet-Nas-01:/opt/hp/hpssacli/bld# /opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show detail

Smart Array P410 in Slot 1

 array A

    physicaldrive 2I:0:5
       Port: 2I
       Box: 0
       Bay: 5
       Status: OK
       Drive Type: Data Drive
       Interface Type: SATA
       Size: 6001.1 GB
       Drive exposed to OS: False
       Native Block Size: 4096
       Rotational Speed: 7200
       Firmware Revision: FS2A
       Serial Number: 183SK2XDF56D
       Model: ATA     TOSHIBA HDWE160
       SATA NCQ Capable: True
       SATA NCQ Enabled: True
       Current Temperature (C): 38
       Maximum Temperature (C): 43
       PHY Count: 1
       PHY Transfer Rate: 3.0Gbps
       Sanitize Erase Supported: False

    physicaldrive 2I:0:6
       Port: 2I
       Box: 0
       Bay: 6
       Status: OK
       Drive Type: Data Drive
       Interface Type: SATA
       Size: 6001.1 GB
       Drive exposed to OS: False
       Native Block Size: 4096
       Rotational Speed: 7200
       Firmware Revision: FS2A
       Serial Number: 183BK3L4F56D
       Model: ATA     TOSHIBA HDWE160
       SATA NCQ Capable: True
       SATA NCQ Enabled: True
       Current Temperature (C): 38
       Maximum Temperature (C): 43
       PHY Count: 1
       PHY Transfer Rate: 3.0Gbps
       Sanitize Erase Supported: False

etc..

need to test:

/opt/hp/hpssacli/bin/hpssacli ctrl slot=1 ld 2 modify led=on