====== HP Hardware RAID Status Commands for Linux: ======

http://kb.gtkc.net/hp-smart-array-cli-commands/

https://binaryimpulse.com/2013/09/hp-array-configuration-utility-command-cheat-sheet/

these commands will show you RAID controller status, config, and details:

hpssacli ctrl all show config

hpssacli ctrl all show status

hpssacli ctrl all show detail

pd is required to show details from the actual arrays and drives themselves:

apt install pd

/opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show status

output should looke like this:

root@Violet-Nas-01:# /opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show status

   physicaldrive 2I:0:5 (port 2I:box 0:bay 5, 6001.1 GB): OK
   physicaldrive 2I:0:6 (port 2I:box 0:bay 6, 6001.1 GB): OK
   physicaldrive 2I:0:7 (port 2I:box 0:bay 7, 6001.1 GB): OK
   physicaldrive 2I:0:8 (port 2I:box 0:bay 8, 6001.1 GB): OK
   physicaldrive 1I:0:1 (port 1I:box 0:bay 1, 8001.5 GB): OK
   physicaldrive 1I:0:2 (port 1I:box 0:bay 2, 8001.5 GB): OK
   physicaldrive 1I:0:3 (port 1I:box 0:bay 3, 8001.5 GB): OK
   physicaldrive 1I:0:4 (port 1I:box 0:bay 4, 8001.5 GB): OK

/opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show detail

output should look like this:

root@Violet-Nas-01:/opt/hp/hpssacli/bld# /opt/hp/hpssacli/bld/hpssacli ctrl slot=1 pd all show detail

Smart Array P410 in Slot 1

   array A

      physicaldrive 2I:0:5
         Port: 2I
         Box: 0
         Bay: 5
         Status: OK
         Drive Type: Data Drive
         Interface Type: SATA
         Size: 6001.1 GB
         Drive exposed to OS: False
         Native Block Size: 4096
         Rotational Speed: 7200
         Firmware Revision: FS2A
         Serial Number: 183SK2XDF56D
         Model: ATA     TOSHIBA HDWE160
         SATA NCQ Capable: True
         SATA NCQ Enabled: True
         Current Temperature (C): 38
         Maximum Temperature (C): 43
         PHY Count: 1
         PHY Transfer Rate: 3.0Gbps
         Sanitize Erase Supported: False

      physicaldrive 2I:0:6
         Port: 2I
         Box: 0
         Bay: 6
         Status: OK
         Drive Type: Data Drive
         Interface Type: SATA
         Size: 6001.1 GB
         Drive exposed to OS: False
         Native Block Size: 4096
         Rotational Speed: 7200
         Firmware Revision: FS2A
         Serial Number: 183BK3L4F56D
         Model: ATA     TOSHIBA HDWE160
         SATA NCQ Capable: True
         SATA NCQ Enabled: True
         Current Temperature (C): 38
         Maximum Temperature (C): 43
         PHY Count: 1
         PHY Transfer Rate: 3.0Gbps
         Sanitize Erase Supported: False

etc..


need to test:

/opt/hp/hpssacli/bin/hpssacli ctrl slot=1 ld 2 modify led=on

~~DISCUSSION~~